Replacing Your Kitchen Sink and Faucet

Spread the love

Nothing can spruce up a kitchen like a new sink and faucet. If it’s been a while since you’ve shopped for sinks, you’ll be surprised and pleased by the many options available. Stainless steel sinks are still a good choice. Many people seem to like the look of porcelain but they are not impact resistant and are susceptible to breaking. Some sinks today are made of a composite material of granite combined with resins; these sinks are resistant to chips, cracks, heat and stains. When shopping for your new sink, make sure that it is the same size as your old sink or slightly larger; and deep enough to accommodate large pots.

Turn off the water, loosen the slip-nuts on the drain, and disconnect any plumbing hookups, including those to a dishwasher or garbage disposal. Unscrew any mounting clips under the sink and break through the sealant around the edge of the sink. Lift out the old sink and set it aside. Before actually installing your new sink, make sure that everything fits and that all the connections can be made. While the sink is still out of the countertop, attach the faucet, supply lines and basket strainer to the sink. Apply silicone sealant around the edges of the sink opening in the countertop. With the lines attached, lower the new sink into position. Tighten the new mounting clips on the underside of the sink after it is in place.

Reconnect the supply tubes, or water lines, to the shutoffs. Turn the water supply back on and check that your faucet is operating correctly. Make sure to allow the silicone sealant to set for several hours before using. A little overwhelmed with the process? Contact your local plumbing professional to ensure a professional kitchen sink installation.

Comments are closed.